Diagonal plow
DA-type
DA-type has a fixed frame.

The plow is known for its capability to eject high and far at both low and high speeds. Ejecting already starts at 25-30 km / h. The plow is very stable and calm on the road. It cleans edges very well, so there is no need to make a second run for remnants. In addition to being a light weight plow, it also has low volume, which makes it easy to work with, easy to push. It does not overcast snow.

DA-type is the bestseller of all the models produced by Kristian Saltvik from the early 1970s to the early 1990. The plows produced by Kristian Saltvik are known as Saltvikplogen®, and Saltvikplogen® quickly became a term among the country's snowplow drivers. Together with A-type, these two plows were a "winning team" for snowplow drivers, especially at mountain passes.
The ejection already starts at about 20 – 25 km/h
Capability to eject high and far
It cleans the edges very well
Ejects well at low and high speeds
Lower fuel and maintenance costs
Generally lower wear and tear of the vehicle, suspension, lining, bolts, etc.
For common roads as well as mountain passes and areas with steep and high edges
One year warranty for plow
With a lighter plow you as a customer will have lower fuel expenses and generally lower wear and tear of the vehicle and its components, compared to heavier plows of the same size. Furthermore, with lower fuel consumption, you will also reduce polluting emissions.
Safety is a very important aspect regardless of where you work. During snow removal with Saltvikplogen®, drivers can reduce their speed and still lift and eject snow off the roads efficiently. With decreased plow speed, the risk of traffic accidents is also minimized. Because of its good ejecting capabilities, the plow is ideal on everything from normal roads to areas with steep and high edges or mountain passes. With its good ejecting qualities, Saltvikplogen is an excellent choice for you as a professional driver.
DA-type is produced according to the Norwegian Public Roads Administration standards. Moreover, we manufactured it especially for working in tough conditions. Saltvik plows have always been known for their solid quality. Therefore, you can still find various plows produced in the 1970s and 1980s in use today.
Standard equipment for DA-type:
Rubber protection to prevent snow overcasting
Ears for parallelogram lifting device
LED-light on both wings
Brinell / OF 600 wear-resistant steel. Standard hole spacing of 305 mm
Front reflector
Flash on the left side
Technical characteristics
Saltvikplogen diagonalplog DA-280
demo nr 1, Ballangen 31.01.2013
Saltvikplogen diagonalplog DA-280
demo nr 2, Ballangen 03.02.2013
For the price information, please contact our office:
+47 76 95 28 00
firmapost@saltvik.as
Other models:

January 2014

March 2018

April 2013

February 2013

May 2014

January 2016

May 2015

lifting device

Made on
Tilda