Diagonal plow
FDH-type
In the further development of FDA-type, it was a great wish from our customers to have a longer / higher wing tip.

We developed a wing tip that has become both longer and higher and is placed behind the corner of the truck. This is a big advantage as snow ejection is higher and further behind.
The technical characteristics as well as the proven properties make FDH-type the best plow on the market in its segment.
Other technical features are the same as for FDA-type.
The ejection already starts at about 20 – 25 km/h
The plow is very stable and calm on the road
It lifts the snow high up in the wing before ejecting
The weight of the plow is 1,080 kg, which makes it easy to push and easy to work with
It clears the bottom very well and does not overcast snow
It clears the edges very well
The plow works very well in the mountains
One year warranty for plow
2-year main bolt, lining and shims warranty – requires good maintenance with weekly lubrication
Saltvik Mek AS is working towards lower fuel and repair cost for our customers, in comparison to heavier plow models. We also care about the environment, and lower consumption leads to lower emissions of polluting gasses. With the plow that cleans the bottom and edges very well, you as a customer will not only experience lower fuel, repair and maintenance expenses, but also save valuable time.
Safety is a very important aspect regardless of where you work. During snow removal with Saltvikplogen® plows, drivers can reduce their speed and still lift and eject snow off the roads efficiently. With decreased need for speed, the risk of traffic accidents is also minimized.
F-type is produced according to the Norwegian Public Roads Administration standards. Moreover, we manufactured it especially for working in tough conditions. Saltvik plows have always been known for their solid quality. Therefore, you can still find A- and DA-plows produced in the 1970s and 1980s in use today.
Standard equipment for FDH-type:
LED-light on the left and right sides
Ears for parallelogram lifting device
Front reflector
Flash on the left side
Brinell / OF 600 wear-resistant steel. Standard hole spacing of 305 mm. F-type has plates on both sides
Rubber protection to prevent snow overcastting
Stone protection device on the right side
Technical characteristics
For the price information, please contact our office:
+47 76 95 28 00
firmapost@saltvik.as
Other models:

January 2014

March 2018

January 2013

April 2013

February 2013

May 2014

May 2015

lifting device

Made on
Tilda